FYI: The Novak tray discharges at 3 A
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Charging And Discharging GP 3700 Cells https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1605 |
Page 1 of 1 |
| Author: | ben [ Fri May 13, 2005 16:32:02 ] |
| Post subject: | Charging And Discharging GP 3700 Cells |
| Author: | Dave Treacy [ Fri May 13, 2005 18:24:30 ] |
| Post subject: | |
For "normal" racing I charge at 4.5A and discharge on the Novak discharge system down to 0.9v. For "championship" racing, charge at 6A, and discharge to 0.9. |
|
| Author: | apexracing [ Fri May 13, 2005 18:41:02 ] |
| Post subject: | |
dave, i think ben wask asking how many amps do you discharge at do you just use the tray, or a discharger, ben i discharge from 10-30 amps, depends on how much charge the pack has. |
|
| Author: | Joep [ Fri May 13, 2005 18:58:36 ] |
| Post subject: | |
FYI: The Novak tray discharges at 3 A
|
|
| Author: | ben [ Fri May 13, 2005 20:05:35 ] |
| Post subject: | |
Hi, Cheers for the replys guys
Ben 
|
|
| Author: | kermode [ Fri May 13, 2005 22:22:52 ] |
| Post subject: | |
| Author: | ben [ Sat May 14, 2005 00:35:05 ] |
| Post subject: | |
| Author: | ldebackker [ Sat May 14, 2005 20:20:29 ] |
| Post subject: | |
| Author: | kermode [ Sat May 14, 2005 22:48:53 ] |
| Post subject: | |
hi ben its not practical to charge in this way without a step charger. before i used this method of charging i would charge my cells at 5amps setting the delta peak cut off to 4mv. i would discharge at 20amps. i have never had any problems with this. i hope this as been some help. |
|
| Author: | ben [ Sun May 15, 2005 01:13:54 ] |
| Post subject: | |
Hi Kirmode yes you have been most helpful and thankyou
Ben
|
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|