XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
rear track width https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1578 |
Page 1 of 1 |
Author: | danno [ Mon May 09, 2005 19:28:08 ] |
Post subject: | rear track width |
Author: | Tonyv [ Mon May 09, 2005 19:29:51 ] |
Post subject: | |
Author: | Joep [ Mon May 09, 2005 19:40:12 ] |
Post subject: | |
Author: | XrayRacr [ Mon May 09, 2005 20:53:02 ] |
Post subject: | Offset |
Couldn't you accomplish the same thing by using wheels (rims) with the offset built into them? |
Author: | Tonyv [ Mon May 09, 2005 21:56:56 ] |
Post subject: | |
Joep: I used spacers between the arms and the bulkheads. Don''t have the off set wheel axles yet. XrayRacr: Instead of the off set wheel axles you can use off set wheels or off set spacers. The latter can be risky though as the wheel will have less contact with the axle that way. Whence the new off set wheel axles which will be in the shops soon. However since I used spacers between the bulkheads and the arms the effect is not entirely the same as using wheel off set. |
Author: | Sailfish [ Wed May 18, 2005 15:05:24 ] |
Post subject: | |
Author: | Tonyv [ Wed May 18, 2005 20:03:07 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |