XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Spring steel dust (orange) on C-Hub https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1577 |
Page 1 of 1 |
Author: | TigeRyan [ Mon May 09, 2005 16:55:12 ] |
Post subject: | Spring steel dust (orange) on C-Hub |
After racing today I noticed some dust from my spring steel axle on the chub and inside the wheel hex once I took it apart, also the opening end of the wheel hex was flared....I checked the dogbones and they are not bent, what could cause this, I also felt a vibration in the car and I am pretty sure it was in the front end....any ideas, clues, hints... I have already checked all the bearings, they are good to go I checked the dogbones they are straight I checked for bent hinge pins and nothing The diff is still real smooth belt was running true... I am out of ideas.... Thanks! |
Author: | Joep [ Mon May 09, 2005 17:11:07 ] |
Post subject: | Re: Spring steel dust (orange) on C-Hub |
Author: | TigeRyan [ Mon May 09, 2005 17:29:03 ] |
Post subject: | |
Ahhhhh, never thought of that....it probably did go dry...would that have caused a vibration as well?? Would I just use the diff lube or a heavier grease like MIP black grease??? Thanks!!!! YOU RULE! |
Author: | Joep [ Mon May 09, 2005 17:32:39 ] |
Post subject: | |
Author: | TigeRyan [ Mon May 09, 2005 17:44:17 ] |
Post subject: | |
Author: | Joep [ Mon May 09, 2005 17:54:21 ] |
Post subject: | |
Author: | TigeRyan [ Mon May 09, 2005 18:11:31 ] |
Post subject: | |
Author: | Joep [ Mon May 09, 2005 18:15:04 ] |
Post subject: | |
Author: | darren styles [ Mon May 09, 2005 22:35:53 ] |
Post subject: | |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |