XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
WHat pinion? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1569 |
Page 1 of 1 |
Author: | xraytifk05 [ Sat May 07, 2005 18:02:37 ] |
Post subject: | WHat pinion? |
Author: | ianp [ Sat May 07, 2005 23:19:06 ] |
Post subject: | |
Author: | kermode [ Sun May 08, 2005 15:47:35 ] |
Post subject: | |
Author: | Giorgi50 [ Sun May 08, 2005 16:13:00 ] |
Post subject: | |
Author: | MartynD [ Sun May 08, 2005 17:42:15 ] |
Post subject: | |
Author: | John_Joe [ Sun May 08, 2005 17:50:42 ] |
Post subject: | |
Author: | xraytifk05 [ Mon May 09, 2005 00:55:11 ] |
Post subject: | |
hey its me again i'm running on carpet with rubber tires |
Author: | MartynD [ Mon May 09, 2005 01:17:15 ] |
Post subject: | |
So am I |
Author: | teamgp [ Mon May 09, 2005 04:01:57 ] |
Post subject: | |
I would suggest 18-21 with rubbers, depending on grip and layout. Lower sizes for high grip and/or tight layout. For foams I'd go up one to three teeth depending on diameter. With 84t spur and 63mm rubbers, ratio & rollout calculations: pinion / internal ratio / rollout 18t / 7.933 / 24.948 19t / 7.516 / 26.344 20t / 7.140 / 27.720 21t / 6.800 / 29.106 With 84t spur and 60mm foams ratio & rollout calculations: 18t / 7.933 / 23.760 19t / 7.516 / 25.080 20t / 7.140 / 26.400 21t / 6.800 / 27.720 22t / 6.491 / 29.040 With 84t spur and 58mm foams ratio & rollout calculations: 19t / 7.516 / 24.244 20t / 7.140 / 25.520 21t / 6.800 / 26.796 22t / 6.491 / 28.072 23t / 6.209 / 29.348 With 84t spur and 56.5mm foams ratio & rollout calculations: 20t / 7.140 / 24.860 21t / 6.800 / 26.103 22t / 6.491 / 27.346 23t / 6.209 / 28.589 |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |