| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| HELP ME PLEASE!!!!! https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1518 |
Page 1 of 2 |
| Author: | xrayfk05man [ Tue May 03, 2005 18:49:57 ] |
| Post subject: | HELP ME PLEASE!!!!! |
| Author: | Dave Treacy [ Tue May 03, 2005 19:17:02 ] |
| Post subject: | |
| Author: | xrayfk05man [ Tue May 03, 2005 19:40:23 ] |
| Post subject: | |
| Author: | mario [ Tue May 03, 2005 19:57:39 ] |
| Post subject: | |
| Author: | xrayfk05man [ Tue May 03, 2005 20:02:43 ] |
| Post subject: | |
| Author: | Martin Hudy [ Tue May 03, 2005 20:15:50 ] |
| Post subject: | |
| Author: | xrayfk05man [ Tue May 03, 2005 20:22:06 ] |
| Post subject: | |
Hi, what do you mean by the speedo limit please? do you mean the punch the speedo gives? If so, I will try and find out how to change this, as the Hara speedo can only be set up through a personal computer or a hand held tuning device. Thank you very much for your help. 
|
|
| Author: | Martin Hudy [ Tue May 03, 2005 20:27:39 ] |
| Post subject: | |
Sorry but I don`t exactly know what he changed. It is something like limit but I will call him tomorrow and I send you answer |
|
| Author: | xrayfk05man [ Tue May 03, 2005 20:28:51 ] |
| Post subject: | |
very much appreciated , Many thanks . 
|
|
| Author: | Jilles Groskamp [ Wed May 04, 2005 13:12:58 ] |
| Post subject: | |
| Author: | Martin Hudy [ Thu May 05, 2005 16:59:42 ] |
| Post subject: | |
| Author: | PaulC2K [ Mon May 09, 2005 01:27:36 ] |
| Post subject: | |
xrayfk05man: Not Dewi hiding behind the username is it? Eitherway, just got back from Bedworth from TORC, and im having problems with my KO VFS-1, same esc etc. Im not sure whats wrong with it, but i'd just like to get a little clarity by Martin Hudy's comment of the ESC cutting out after 3min, as it sounds similar to what im having, but its doing it almost like the cells are dead, but thats definately not the case as i ran a 2nd set once the meeting was finished and the same thing happened, i didnt try it, but i think if i'd have switched it on & off, it may have been fine, it definately worked when removing the Shotki (wasnt sure if i'd blown it). Also, you dont need the PC based software to adjust the Hara Twister esc, the VFS-1 setting adapter should work, it does with the Yokomo branded version as we tried this on a mates ESC last friday and it was fine, think these are about £40 a go, i bought 2 of these ESCs, one with the doofer, one without, not like I need 2! Im not sure if KO would be able to help in this matter, it depends how much responsibility they take for a Hara badged product, however RCTech does have a VFS-1 thread which has a user 'KO Staff' who pops in and might be able to offer assistance if the regulars in there cant. Ive just posted my problem and was told of this thread just now. Personally i think my problem is more serious than a heat related cut-off issue, especially as im running a 27t motor! |
|
| Author: | garsport [ Mon May 09, 2005 09:16:51 ] |
| Post subject: | |
| Author: | darren styles [ Mon May 09, 2005 22:33:34 ] |
| Post subject: | |
| Author: | 'X' [ Tue May 10, 2005 00:48:53 ] |
| Post subject: | |
| Author: | PaulC2K [ Tue May 10, 2005 00:53:14 ] |
| Post subject: | |
| Author: | PaulC2K [ Tue May 10, 2005 01:14:36 ] |
| Post subject: | |
| Author: | Arthur [ Tue May 10, 2005 09:17:18 ] |
| Post subject: | |
| Author: | Alex Stocker [ Tue May 10, 2005 17:11:07 ] |
| Post subject: | |
Hi With the VFS Setting device you can limit the current. Standart setting of a Hara 2 is full open, 220A. You habe a Frequency of 3,6Mhz for each trottle step. THe Hara might be a litte different, because I´ve got a normal KoPro VFS1. ALex |
|
| Author: | DeLaSoul [ Thu May 12, 2005 15:09:59 ] |
| Post subject: | |
| Page 1 of 2 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|