| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Please help with gearing on FK04.... https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1506 |
Page 1 of 1 |
| Author: | malcnz1 [ Sat Apr 30, 2005 07:18:11 ] |
| Post subject: | Please help with gearing on FK04.... |
Have just got this car and had T1R before and was using an 84/29 setup in stock class and do I follow same guidlines now that this car has the low ratio pully set as std.-T1R didnt. Cheers. |
|
| Author: | Hagberg [ Sat Apr 30, 2005 11:35:18 ] |
| Post subject: | |
You were using a gearing of approx. 6.15, for the new pulley set this gearing is achieved when using 93/27 or 84/24 You can calculate this yourself easily: spur/pinion x internal ratio: your gearing The internal ratio for the T1R is 2.125 The FK04 ratio is 1.77 The FK05 ratio is 1.7 |
|
| Author: | malcnz1 [ Sat Apr 30, 2005 12:09:55 ] |
| Post subject: | |
Thats awesome thanks for that. The set up book I have is for the Evo 2 which has same ratio as T1R so thats why I had to ask. I only have a 93/28 so will use that for practise and get a 27 during the week for racing next sunday. Thats a good combo to as it takes the motor away from the belt nicely but engine is as close to bottom of chassis as comfortable so a 27 will just make it perfect. Thanks again. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|