It's not uncommon for the belt to touch the can - it's not a problem
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| HELP - New guy needs your assistance! https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1384 |
Page 1 of 1 |
| Author: | bbking9 [ Mon Apr 11, 2005 07:59:43 ] |
| Post subject: | HELP - New guy needs your assistance! |
Just got a T1R - it has low ratio pulleys, hollow alum layshaft, Novak SS5800 BL system. I race outdoors on parking lot track. Running 96/22 spur/pinion setup (gives me 7.72 FDR). Novak recommends keeping final drive ratio between 7.30 to 7.80 - but closer to 7.80 so ESC does not overheat. Rear belt seems to be touching motor can - just barely. But I cannot go to smaller Spur/pinion or it will really rub. From my search 96T in 48 Pitch spurs is as large as anyone makes. I can go to 96/23 and it likely wont touch can - but then I am at the limit of 7.39 final drive ratio and may overheat the ESC. What can I do so belt does not touch motor can? What does everyone with a T1R do??? Go to 64 Pitch Spur and Pinion? HELP!!! |
|
| Author: | Dave Treacy [ Mon Apr 11, 2005 08:44:46 ] |
| Post subject: | |
It's not uncommon for the belt to touch the can - it's not a problem
|
|
| Author: | bbking9 [ Mon Apr 11, 2005 09:05:13 ] |
| Post subject: | |
Thanks Dave - that's a relief. I've got several 48P spurs and pinions and would like to use them. |
|
| Author: | Tonyv [ Mon Apr 11, 2005 11:53:54 ] |
| Post subject: | |
| Author: | Steve [ Mon Apr 11, 2005 14:17:17 ] |
| Post subject: | Re: HELP - New guy needs your assistance! |
| Author: | mario [ Mon Apr 11, 2005 14:54:42 ] |
| Post subject: | |
| Author: | bbking9 [ Mon Apr 11, 2005 15:30:32 ] |
| Post subject: | |
| Author: | psyco [ Wed Apr 13, 2005 03:35:23 ] |
| Post subject: | |
| Author: | bbking9 [ Wed Apr 13, 2005 03:44:25 ] |
| Post subject: | |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|