| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Dive https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13786 |
Page 1 of 1 |
| Author: | andrewd [ Sat Nov 23, 2013 02:05:16 ] |
| Post subject: | Dive |
Ran the car tonight and seems all good for this weekends racing the only little concern that I have is that when I approach a bend and slow to take the corner the car seems to dive and then pick back up when coming out of the bend Any thoughts |
|
| Author: | Hagberg [ Sat Nov 23, 2013 18:10:50 ] |
| Post subject: | Re: Dive |
You can always try anti-dive if you feel that too much weight is being transferred towards the front on corner entry (loose off-power). You can also try to reduce your rear droop. |
|
| Author: | dzajdol [ Mon Nov 25, 2013 13:06:23 ] |
| Post subject: | Re: Dive |
anti-dive or reduce rear droop is good options for traction roll? maybe some other changes for traction roll? |
|
| Author: | Hagberg [ Mon Nov 25, 2013 23:08:10 ] |
| Post subject: | Re: Dive |
| Author: | dzajdol [ Tue Nov 26, 2013 09:01:58 ] |
| Post subject: | Re: Dive |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|