| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| What spur and Pinion for 6.0 FDR https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13772 |
Page 1 of 1 |
| Author: | Hofvander [ Tue Nov 19, 2013 17:51:45 ] |
| Post subject: | What spur and Pinion for 6.0 FDR |
Hi! Need help since I dont have a car yet to find the correct sized spur and pinion to achieve a 6.0 (or something) FDR and still have room to move the motor forward or rearward for different gearing possibilities. The best combo of spur and pinion to achieve this with the motor placed as centered as possible. Looking to get a T4 14 and I am going to run 10.5 Blinky. Alex |
|
| Author: | Hagberg [ Tue Nov 19, 2013 19:46:35 ] |
| Post subject: | Re: What spur and Pinion for 6.0 FDR |
104T spur #305874 and 33T pinion #305983 will give you an FDR of 5.98:1 |
|
| Author: | dzajdol [ Tue Nov 19, 2013 21:45:30 ] |
| Post subject: | Re: What spur and Pinion for 6.0 FDR |
What is best option: 1. 78 and 30 - 4,94 2. 91 and 34 - 4,94 I know that there is no such gear, but if I have the same module? Is it better to be a small pinion , and a small spur |
|
| Author: | spotlessdragon [ Wed Nov 20, 2013 12:26:49 ] |
| Post subject: | Re: What spur and Pinion for 6.0 FDR |
smaller pinion will spin up faster and could make the car a bit loose |
|
| Author: | DaleBurr [ Wed Nov 20, 2013 19:51:33 ] |
| Post subject: | Re: What spur and Pinion for 6.0 FDR |
| Author: | dzajdol [ Wed Nov 20, 2013 21:55:04 ] |
| Post subject: | Re: What spur and Pinion for 6.0 FDR |
What about motor temp - which are the best |
|
| Author: | Hagberg [ Sat Nov 23, 2013 18:15:02 ] |
| Post subject: | Re: What spur and Pinion for 6.0 FDR |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|