| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| 51mm drive shaft https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13762 |
Page 1 of 1 |
| Author: | EPicLURcher [ Sat Nov 16, 2013 16:27:16 ] |
| Post subject: | 51mm drive shaft |
Apart from length, whats the difference between 52mm and 51mm front driveshafts? 51mm part number 305321 |
|
| Author: | brano [ Tue Nov 19, 2013 07:18:51 ] |
| Post subject: | Re: 51mm drive shaft |
If you will check the instruction manual there you will find all info: Longer drive shafts (52mm) make the car easier to drive because they give more traction and better stability, mainly in chicanes. However, the car will understeer more than with shorter (50mm) shafts which give a lot of steering and impart aggression to the car. Both left & right shafts should ALWAYS be the same length at one end of the car (front or rear). 52mm shafts are recommended for carpet and large asphalt tracks. 50mm shafts are recommended for small-medium tight asphalt tracks. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|