XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Drive shaft collars https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13758 |
Page 1 of 1 |
Author: | EPicLURcher [ Tue Nov 12, 2013 21:40:44 ] |
Post subject: | Drive shaft collars |
Hi Does anyone know where i can buy drive shaft covers to stop pins coming out of the drive shaft joint? Thanks |
Author: | Danny Buck [ Tue Nov 12, 2013 21:52:15 ] |
Post subject: | Re: Drive shaft collars |
Most guys just use some larger sized heat shrink tubing to go around the coupler and contain the pins. I've never had issues ejecting the pins or the set screws with this system. |
Author: | beale [ Tue Nov 12, 2013 22:18:41 ] |
Post subject: | Re: Drive shaft collars |
+1 for the heatshrink, replace every few meetings, check grubs are tight and pack with graphite grease. |
Author: | DaleBurr [ Wed Nov 13, 2013 10:39:58 ] |
Post subject: | Re: Drive shaft collars |
I use these here on normal (non ECS) shafts: |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |