| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Using a t3 ball diff in front of t4 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13755 |
Page 1 of 1 |
| Author: | EPicLURcher [ Sun Nov 10, 2013 23:46:06 ] |
| Post subject: | Using a t3 ball diff in front of t4 |
Hi I want to get a diff for the front of my car. I can buy a used ball for £20 or a gear for £60. The ball is from a t3. Will it fit? And will it be odd with a ball in front and gar in rear? |
|
| Author: | The Eagle [ Mon Nov 11, 2013 00:08:05 ] |
| Post subject: | Re: Using a t3 ball diff in front of t4 |
I don't think that a t3 ball diff will fit in the t4 bulkheads. On the t4 I think they are to close together so not allowing the ball diff to fit in the car. I tried it for one of the MM's last year and it didn't work. Hope that was helpful? |
|
| Author: | Skiddins [ Mon Nov 11, 2013 02:00:02 ] |
| Post subject: | Re: Using a t3 ball diff in front of t4 |
I would go with a gear diff. Why so expensive? |
|
| Author: | EPicLURcher [ Tue Nov 12, 2013 00:32:57 ] |
| Post subject: | Re: Using a t3 ball diff in front of t4 |
A gear diff from a well known shop based in aldershot costs £44, oil for £14 |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|