XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T4 stripped spur gear https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13663 |
Page 1 of 1 |
Author: | Leglessracing [ Mon Sep 02, 2013 18:20:00 ] |
Post subject: | T4 stripped spur gear |
Hi all, Ran my t4 for the first time today and its stripped a few teeth off of the spur gear has anyone had any issues like this? I'm running a lrp tc sxx v2 with a 15.5t motor. I'm also using 64dp with a 28t pinion and a 112t spur gear |
Author: | Skiddins [ Mon Sep 02, 2013 23:37:48 ] |
Post subject: | Re: T4 stripped spur gear |
Check that you did up the motor mount screws in the correct order etc. Did the motor move? |
Author: | Leglessracing [ Mon Sep 02, 2013 23:58:03 ] |
Post subject: | Re: T4 stripped spur gear |
Had a check and the motor is still in place and all nice and tight. S I can see the motor having wobbled to cause cause any damage. The motor does feel a bit notch though. I think I may have to find a new motor! |
Author: | Andrew Webber [ Tue Sep 03, 2013 11:58:17 ] |
Post subject: | Re: T4 stripped spur gear |
A couple of things to check. The nut that attaches to the motor mount, did you tighten that up - Page 10, says not to tighten fully but many accidently forget to go back and do so. And, you put all 4 screws in the layshaft bulkhead? Cheers Andrew |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |