| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Gear Diffs for Xray T2 008 Euro https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13659 |
Page 1 of 1 |
| Author: | Dan the Man [ Fri Aug 30, 2013 23:56:55 ] |
| Post subject: | Gear Diffs for Xray T2 008 Euro |
As per the title, can the T2'008 be fitted with the Xray Gear Diff, or do you have to go aftermarket parts such as the Spec-R gear diffs? |
|
| Author: | beale [ Sat Aug 31, 2013 09:10:14 ] |
| Post subject: | Re: Gear Diffs for Xray T2 008 Euro |
I have Spec R's in my T2 009 but that's due to Xray not making 34t gear diffs. I think the 008 ran 38t diff pulleys so theoretically yes they should fit but a guy on another forum could not fit them in a T2R. If you can find someone at a race club with 1 you could try? |
|
| Author: | Dan the Man [ Sat Aug 31, 2013 09:57:14 ] |
| Post subject: | Re: Gear Diffs for Xray T2 008 Euro |
| Author: | Swanny [ Wed Sep 11, 2013 01:31:25 ] |
| Post subject: | Re: Gear Diffs for Xray T2 008 Euro |
I run a gear diff in my T2'009 (which is basically the same as the T2'008). There is a conversion kit which includes the 38 tooth spool, 38 tooth diff pulley and longer belts. You can still find it listed on the XRay website, but whether you will find the kit at shops is a different matter. Here is the link to the conversion kit: http://www.teamxray.com/teamxray/produc ... od_id=3108 At the least you can buy all the parts individually. I find the rear belt to be a little tight with the gear diff, so I back it off a bit. You should be able to use the new low friction belts with it. I have some coming, so I will see what a difference they make. |
|
| Author: | brano [ Wed Sep 11, 2013 06:00:37 ] |
| Post subject: | Re: Gear Diffs for Xray T2 008 Euro |
XRAY has the #300944 conversion set still in stock so it should be no problem to order them. |
|
| Author: | beale [ Wed Sep 11, 2013 07:49:54 ] |
| Post subject: | Re: Gear Diffs for Xray T2 008 Euro |
What are the belt lengths? I have the spool pulley and ball diff pulley already but would like to use a 38t gear diff on my t2 09 as have a spare for my T3 12 |
|
| Author: | Hagberg [ Wed Sep 11, 2013 12:24:20 ] |
| Post subject: | Re: Gear Diffs for Xray T2 008 Euro |
| Author: | Swanny [ Wed Sep 11, 2013 13:19:43 ] |
| Post subject: | Re: Gear Diffs for Xray T2 008 Euro |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|