| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Steering linkage screws coming loose https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13644 |
Page 1 of 1 |
| Author: | EPicLURcher [ Wed Aug 21, 2013 16:59:02 ] |
| Post subject: | Steering linkage screws coming loose |
Hi A few times now ive been racing and the screws connecting steering knuckles to the linkage has come loose. What should i do to stop this? |
|
| Author: | Skiddins [ Wed Aug 21, 2013 23:58:16 ] |
| Post subject: | Re: Steering linkage screws coming loose |
| Author: | EPicLURcher [ Thu Aug 22, 2013 12:14:12 ] |
| Post subject: | Re: Steering linkage screws coming loose |
Yeah the screw is flush. Maybe i did strip it. |
|
| Author: | Skiddins [ Thu Aug 22, 2013 14:52:12 ] |
| Post subject: | Re: Steering linkage screws coming loose |
| Author: | EPicLURcher [ Fri Aug 23, 2013 08:49:09 ] |
| Post subject: | Re: Steering linkage screws coming loose |
Thats a good idea. Wont the nut stop the knuckle from rotating smoothly |
|
| Author: | Skiddins [ Fri Aug 23, 2013 10:28:25 ] |
| Post subject: | Re: Steering linkage screws coming loose |
| Author: | beale [ Fri Aug 23, 2013 11:57:58 ] |
| Post subject: | Re: Steering linkage screws coming loose |
Do you mean the steering ball joint or the top screw the knuckle pivots on/camber link attaches to. Only reason I ask is the only part I have ever had to replace on an Xray T2/T3 is the knuckle due to the thread pulling after a big impact |
|
| Author: | Hagberg [ Sun Aug 25, 2013 22:31:05 ] |
| Post subject: | Re: Steering linkage screws coming loose |
I've only had them come loose when the steering block had stripped threads. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|