Hi All,
First time on this forum
Racing stock indoors on Foam, would anyone help me with a basic setup or share their setup.
I've looked up so many indoor setups but they are all using rubber.
Thanks in advance for your time and help.
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Carpet Foam Setup Needed Please :) https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13628 |
Page 1 of 1 |
| Author: | Texco [ Wed Aug 07, 2013 03:09:18 ] |
| Post subject: | Carpet Foam Setup Needed Please :) |
Hi All, First time on this forum Racing stock indoors on Foam, would anyone help me with a basic setup or share their setup. I've looked up so many indoor setups but they are all using rubber. Thanks in advance for your time and help. |
|
| Author: | beale [ Wed Aug 07, 2013 07:59:08 ] |
| Post subject: | Re: Carpet Foam Setup Needed Please :) |
You will need to give more information ie. Technical, open, high/low grip, motor, chassis used. The only thing I found and had recommended on T2 009 and T3 12 is to use a diff in the front to prolong component life, also widen the front trackwidth to help prevent grip roll. Other than that I ran the base setup, see what you find every track is different |
|
| Author: | Texco [ Wed Aug 07, 2013 10:08:36 ] |
| Post subject: | Re: Carpet Foam Setup Needed Please :) |
yeah I should add more info in future. T4, Mixed Track, Medium Grip 17.5/13.5 Motor I will try the base setup and see what happens. thanks |
|
| Author: | sonic2 [ Wed Aug 07, 2013 21:49:06 ] |
| Post subject: | Re: Carpet Foam Setup Needed Please :) |
I too will be racing my t4 on foams indoors on carpet, high grip. +1 to the earlier suggestion - A diff up front is what I have got for mine. You will also need to be looking at higher CST weights too, or the car will diff out. Possibly harder springs and shock oils too to keep the suspension working less and grip rolling. Droop will be important. I would possibly try none on the rear to start with and a minimal front setting. Tyres, I will be using 42shore front, 40 shore front. Hope that helps, but i cant tell you any more as im still building mine up! 
|
|
| Author: | Hagberg [ Sun Aug 18, 2013 22:23:42 ] |
| Post subject: | Re: Carpet Foam Setup Needed Please :) |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|