XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
layshaft https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13622 |
Page 1 of 1 |
Author: | spotlessdragon [ Wed Jul 31, 2013 20:17:15 ] |
Post subject: | layshaft |
has anybody used the closed layshaft mounts and how did the car perform?? |
Author: | Skiddins [ Wed Jul 31, 2013 20:39:53 ] |
Post subject: | Re: layshaft |
They are fine. Work exactly the same as the kit items, but now you can remove all the screws. Another tuning option |
Author: | Jampot [ Fri Aug 02, 2013 23:23:50 ] |
Post subject: | Re: layshaft |
1Issue with running all 4 screws out is, where the top deck fins out just in front of the forward screws of the 4 it makes it weaker and can split it! I think it was from a front collision and the fact it can flex a lot more like a banana and just split it!!! |
Author: | Andrew Webber [ Sat Aug 03, 2013 00:47:03 ] |
Post subject: | Re: layshaft |
I raised the top deck 1mm when using the new layshaft holders. Stops the bulkheads interfering with the topdeck when twisting. |
Author: | spotlessdragon [ Sat Aug 03, 2013 10:52:40 ] |
Post subject: | Re: layshaft |
Author: | Andrew Webber [ Sun Aug 04, 2013 12:50:50 ] |
Post subject: | Re: layshaft |
Raising the top deck increased flex by a tiny bit. I found a good improvement in grip and consistency in the car everywhere. I do run on very low traction asphalt. |
Author: | spotlessdragon [ Sun Aug 04, 2013 15:04:45 ] |
Post subject: | Re: layshaft |
Author: | Andrew Webber [ Sun Aug 04, 2013 21:57:08 ] |
Post subject: | Re: layshaft |
I was hoping to test that yesterday but rain interrupted that |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |