XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T4 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13584 |
Page 1 of 1 |
Author: | Kensei [ Tue Jul 02, 2013 22:04:42 ] |
Post subject: | T4 |
Planning on buying this car. Coming from Corally RDX PHi'09, TC5 and TC6. Partnumber 308092 shock foam insert. Use or not? (didn't use foam insert with TC5 and TC6) Drill shock cap 1.5mm. Yes or no? (did that 1.0 or 1.5mm with TC5 and TC6) Green slime needed when building shocks. Necesarry or not? (used that when building TC5 and TC6 shocks, not with Corally RDX PHi'09) Other specific things additionally needed together with buying the car? Going to get me the Spec-R CVD Universal Swing Shaft V2. |
Author: | MikeA [ Tue Jul 02, 2013 22:55:49 ] |
Post subject: | Re: T4 |
Hi. -On the Setup- S eets nobody uses the Foam inserts.I took them out as well. -No need to drill a hole because there is a hole in the cap from the factory. -I used Green slim when I built my shocks.Don't know if it was necessary.These are the best shocks I have built in 20 years of RC racing. Hope I helped. Mike |
Author: | Kensei [ Wed Jul 03, 2013 11:07:46 ] |
Post subject: | T4 tooth count |
Is there a minimum and maximum toothcount for the T4? I mean the min/max teeth of spur and pinion together? Are these possible? 3.50 70/38 4.00 72/34 4.00 74/35 4.14 74/34 4.26 74/33 4.39 74/32 4.50 74/31 |
Author: | Skiddins [ Wed Jul 03, 2013 11:40:12 ] |
Post subject: | Re: T4 |
Should be pretty accurate, but I always try to gear in the middle of a spur's range, not the extremes. You might find that the motor starts to foul on the top deck etc before you reach the extremes; |
Author: | Kensei [ Wed Jul 03, 2013 11:43:42 ] |
Post subject: | Re: T4 |
Author: | JasonH [ Wed Jul 03, 2013 13:00:51 ] |
Post subject: | Re: T4 |
Thanks Skiddins is this a chart of what will fit in the car ? if so this is the info i have been after for a mate of mine |
Author: | Skiddins [ Wed Jul 03, 2013 21:47:59 ] |
Post subject: | Re: T4 |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |