| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| T3'12 Carpet - less aggressive https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13576 |
Page 1 of 1 |
| Author: | dzajdol [ Mon Jun 24, 2013 19:38:41 ] |
| Post subject: | T3'12 Carpet - less aggressive |
Hi. This is my setup: I want less aggressive model - what I must change? In this setup when track gets more traction have model in corners bowl over (rolling up) Any suggestions? |
|
| Author: | Skiddins [ Mon Jun 24, 2013 21:35:53 ] |
| Post subject: | Re: T3'12 Carpet - less aggressive |
Perhaps, softer front springs and make the front track of the car wider. And maybe thicker front oil |
|
| Author: | Matt W [ Tue Jun 25, 2013 19:03:33 ] |
| Post subject: | Re: T3'12 Carpet - less aggressive |
Few suggestions to your setup..... + Shock oil- 450cst + Front spring 2.8 + Rear spring 2.6 + Ackerman- 0mm + Bump steer- 2mm + Front droop- 6 + Rear droop- 5 + If Rear end is loose use split blocks on rear not solid |
|
| Author: | dzajdol [ Tue Jun 25, 2013 20:30:18 ] |
| Post subject: | Re: T3'12 Carpet - less aggressive |
| Author: | Matt W [ Wed Jun 26, 2013 00:37:00 ] |
| Post subject: | Re: T3'12 Carpet - less aggressive |
On your setup sheet you have said that you are running the solid lower suspension mount on the rear instead of the split mounts that come with the kit. This will make the rear end loose and make the car more aggressive. |
|
| Author: | Andrew Webber [ Wed Jun 26, 2013 08:48:22 ] |
| Post subject: | Re: T3'12 Carpet - less aggressive |
Like Matt W mentioned, removing ackerman shims will smooth the steering out a lot. |
|
| Author: | Hagberg [ Thu Jun 27, 2013 15:28:18 ] |
| Post subject: | Re: T3'12 Carpet - less aggressive |
Increase your rear droop, decrease your front droop. Remove ackerman shims Anti-dive up front Linear rear spring |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|