XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Charging lipos for 17.5 blinky! https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13550 |
Page 1 of 1 |
Author: | Matt W [ Thu Jun 06, 2013 15:58:34 ] |
Post subject: | Charging lipos for 17.5 blinky! |
Hi, I was wondering if there were ways to get more power out of the lipos when charging for blinky racing. I currently charge at 8amps which helps a little but wondered if there was anything else I could do? |
Author: | beale [ Thu Jun 06, 2013 17:04:08 ] |
Post subject: | Re: Charging lipos for 17.5 blinky! |
Can't advise you but out of interest what lipo's are you using and how old are they? |
Author: | Matt W [ Thu Jun 06, 2013 18:19:48 ] |
Post subject: | Re: Charging lipos for 17.5 blinky! |
Mine are the 80c intellect 6800 and I currently charge them at 8amps and change them every 6 months! |
Author: | Skiddins [ Thu Jun 06, 2013 20:20:21 ] |
Post subject: | Re: Charging lipos for 17.5 blinky! |
Author: | beale [ Thu Jun 06, 2013 23:59:47 ] |
Post subject: | Re: Charging lipos for 17.5 blinky! |
Again I can't advise but our local blinky expert runs orca's and swears by them but says it is a trade off between weight and power, |
Author: | msamaro [ Fri Jun 07, 2013 12:50:45 ] |
Post subject: | Re: Charging lipos for 17.5 blinky! |
Skiddins, Could I measure the internal resistance of a Lipo by just using a multimeter?? |
Author: | Skiddins [ Fri Jun 07, 2013 14:00:32 ] |
Post subject: | Re: Charging lipos for 17.5 blinky! |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |