XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
17.5 blinky gearing https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13535 |
Page 1 of 1 |
Author: | spotlessdragon [ Wed May 29, 2013 21:15:14 ] |
Post subject: | 17.5 blinky gearing |
hi all i am racing 17.5 blinky soon and need a fdr around 3.5 ish and was after some advise on what spur/ pinion to go for . the track is around 100 meters x 70 meters and a fast flowing track tekin rs pro and 17.5 gen 2 motor thanks ![]() ![]() |
Author: | coastal [ Fri May 31, 2013 20:48:00 ] |
Post subject: | Re: 17.5 blinky gearing |
Buy some RW spurs for the Xray from Demon Products 67 or 68 tooth with a 37/38 tooth pinion should be about right. You cannot get that type of ratio with true Xray Spurs they don't make them small enough (not enough demand they say ![]() |
Author: | Sid [ Sat Jun 01, 2013 02:36:40 ] |
Post subject: | Re: 17.5 blinky gearing |
I use arrowmax 92t 64p when running such low ratios. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |