XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Oversteer https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13518 |
Page 1 of 1 |
Author: | andrewd [ Sat May 11, 2013 10:27:38 ] |
Post subject: | Oversteer |
Hi What's the best way to cure oversteer |
Author: | Skiddins [ Sat May 11, 2013 12:43:39 ] |
Post subject: | Re: Oversteer |
Author: | Hagberg [ Sat May 11, 2013 14:54:02 ] |
Post subject: | Re: Oversteer |
Try to use less steering lock At which part of the corner does it oversteer? Entry, mid corner or exit? |
Author: | andrewd [ Sun May 12, 2013 10:26:07 ] |
Post subject: | Re: Oversteer |
xform/index.php?act=view&ID=825&setup=t3_2011 Above is my setup sheet hope it makes sense the track has some tight turns and a nice long straight. |
Author: | Skiddins [ Sun May 12, 2013 20:33:11 ] |
Post subject: | Re: Oversteer |
Why so little camber? Try 1deg front & 1.5 rear |
Author: | Hagberg [ Mon May 13, 2013 14:30:48 ] |
Post subject: | Re: Oversteer |
Increase your camber to at least 1 degree both front and rear. Try to use toe-out instead of toe-in for the front wheels. 0.5 degrees toe out is a minimum. Maybe try anti-dive at the front (+0.75). |
Author: | andrewd [ Mon May 13, 2013 21:21:37 ] |
Post subject: | Re: Oversteer |
thanks for the advice i was going to try the shock spacers to. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |