| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| 4 step damper https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1351 |
Page 1 of 1 |
| Author: | pakho [ Thu Apr 07, 2005 12:41:40 ] |
| Post subject: | 4 step damper |
| Author: | Dave Treacy [ Thu Apr 07, 2005 12:46:16 ] |
| Post subject: | |
| Author: | Col [ Thu Apr 07, 2005 12:49:43 ] |
| Post subject: | Hmm |
Sometimes you can spin the adjusters so they don't click anymore, doesn't necessarilly mean its broken. Safest option is to take the shock apart, and remove the piston part and seperate it and inspect, clumsy way (could damage) is to just turn it untill it does click, its strange that its managed to damage its adjustable teeth so much that it won't work, but then i don't know how old they are. If you need a new part, then its the shock frame that you need, unless you have damaged the keyed piston rod !!! the nylon shock frame is part no: |
|
| Author: | Steve [ Thu Apr 07, 2005 14:23:15 ] |
| Post subject: | |
| Author: | chaz [ Thu Apr 07, 2005 15:09:48 ] |
| Post subject: | |
| Author: | pakho [ Thu Apr 07, 2005 15:12:46 ] |
| Post subject: | |
| Author: | teamgp [ Thu Apr 07, 2005 15:36:48 ] |
| Post subject: | |
| Author: | c-lyon [ Thu Apr 07, 2005 17:34:58 ] |
| Post subject: | |
Sometimes this happens to me. If I push in the shock shaft and turn it a bit, and then pull back down the clicks will magically reappear. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|