| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Low traction Carpet setup https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13500 |
Page 1 of 1 |
| Author: | riketsu [ Tue Apr 30, 2013 01:18:17 ] |
| Post subject: | Low traction Carpet setup |
Hey guys, We have been running the T4 successfully on asphalt for a few races now, what setup changes should I begin with when changing to a low traction carpet. The track is very technical and small with a new carpet and no groove on it. We are running 10.5 boosted. Besides the basic carpet setup anything else I should be in a look out for?? (Roll centers, diff oils, springs, etc) |
|
| Author: | Hagberg [ Sat May 11, 2013 15:14:16 ] |
| Post subject: | Re: Low traction Carpet setup |
Did you try a progressive spring up front? Try to use more droop, and perhaps anti-dive for the front arms. It sure helps for low traction. Sometimes you can loose the screw a little bit which holds the center motor mount, so that the nut is not fully tightened, which allows the car to flex more towards the rear. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|