| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| motor setup https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13443 |
Page 1 of 1 |
| Author: | phillip46 [ Tue Mar 19, 2013 11:09:13 ] |
| Post subject: | motor setup |
Hi.i use to run a gm 13.5 and a hobbywing speedo on my t3.i no fitted a thunder power motor.with the same speedo settings as on the gm.its slow compaired to the gm.i see the timing on the motor is on 20.never moved about on the gm so first need some advice.thanks. |
|
| Author: | Hagberg [ Tue Mar 19, 2013 12:27:55 ] |
| Post subject: | Re: motor setup |
Increase the timing on the motor by 5-10 degrees and use a longer gear ratio. |
|
| Author: | phillip46 [ Sat Mar 23, 2013 12:24:15 ] |
| Post subject: | Re: motor setup |
Hi Alex.i did as u sugested and straight line speed seems ok.its not as punchy out of sharp bends .im running 32t pinion on 84t spur with 27º on the motor.its still cold over hear and the motor is getting to around 65ºC.Would i gain punch by trying a smaller pinion.the motor does not sound revy at the end of the straight compaired to the old gm.thanks |
|
| Author: | Skiddins [ Sat Mar 23, 2013 13:51:12 ] |
| Post subject: | Re: motor setup |
| Author: | Jordan Norwood [ Sun Mar 24, 2013 18:13:45 ] |
| Post subject: | Re: motor setup |
skiddins do you change the gearing for when you change the rotor? |
|
| Author: | Skiddins [ Sun Mar 24, 2013 23:20:05 ] |
| Post subject: | Re: motor setup |
| Author: | coastal [ Mon Mar 25, 2013 20:24:03 ] |
| Post subject: | Re: motor setup |
| Author: | Skiddins [ Tue Mar 26, 2013 01:51:02 ] |
| Post subject: | Re: motor setup |
Blue is sold as the Torque rotor, the green is Hi-Torque rotor |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|