XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
toe at front wishbones https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13428 |
Page 1 of 1 |
Author: | Nico' [ Mon Mar 11, 2013 19:30:35 ] |
Post subject: | toe at front wishbones |
Hi what is the interest to have 2mm ff et 1,5 fr at front wishbones , to get inboard toe out? why please? |
Author: | Hagberg [ Sat Mar 16, 2013 11:54:50 ] |
Post subject: | Re: toe at front wishbones |
Inboard toe-out (also referred to as arm sweep) is an option used by many team drivers. It will give you more turn-in, especially in low speed corners, and will make the car more stable on-power. |
Author: | Nico' [ Sun Mar 17, 2013 10:59:02 ] |
Post subject: | Re: toe at front wishbones |
thanks Alex! |
Author: | B00t13g [ Sun Mar 31, 2013 06:06:05 ] |
Post subject: | Re: toe at front wishbones |
What shims are you using to get the 2mm front track width? I don't remember seeing any .5s. Thanks Alex! |
Author: | Hagberg [ Tue Apr 02, 2013 08:42:07 ] |
Post subject: | Re: toe at front wishbones |
Author: | Skiddins [ Tue Apr 02, 2013 10:34:56 ] |
Post subject: | Re: toe at front wishbones |
Schumacher also do nice wide very good quality shims that are the same diameter as the Xray items (the only parts I have left over from Schumacher), they do some that are 0.5mm Skiddins |
Author: | brano [ Wed Apr 03, 2013 06:09:12 ] |
Post subject: | Re: toe at front wishbones |
XRAY now offers also the 0.5mm shims - #303121-K Alu Shim 3x6x0.5mm - Black (10) or #303121-O Alu Shim 3x6x0.5mm - Orange (10). |
Author: | B00t13g [ Wed Apr 03, 2013 07:36:07 ] |
Post subject: | Re: toe at front wishbones |
Author: | Skiddins [ Wed Apr 03, 2013 10:21:18 ] |
Post subject: | Re: toe at front wishbones |
Author: | beale [ Wed Apr 03, 2013 20:41:29 ] |
Post subject: | Re: toe at front wishbones |
Standard 3mm washers are generally 0.5mm and 7mm OD |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |