| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Upper Bulkhead https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13400 |
Page 1 of 1 |
| Author: | Chris Lovely [ Thu Feb 28, 2013 13:22:13 ] |
| Post subject: | Upper Bulkhead |
Hi Guys I have been running an old Xray T3'11 with the older L link setup With L links front and back (L1 and L2) They are in the initial kit position!! To get the same position, which hole would I be looking to use on the T3'12 style upper bulkhead clamps Chris |
|
| Author: | Skiddins [ Thu Feb 28, 2013 13:53:06 ] |
| Post subject: | Re: Upper Bulkhead |
If I recall, it's 0mm of shims on the clamps. 1mm of shims if you want to be the same as the H1 & H2 links SKiddins |
|
| Author: | Chris Lovely [ Sat Mar 02, 2013 18:04:38 ] |
| Post subject: | Re: Upper Bulkhead |
Cheers for the info Skiddins But im looking for the position in the upper clamps. In the three positions And similar to the L links |
|
| Author: | Skiddins [ Sun Mar 03, 2013 03:26:59 ] |
| Post subject: | Re: Upper Bulkhead |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|