XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
motor problem https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13385 |
Page 1 of 1 |
Author: | phillip46 [ Sat Feb 16, 2013 10:19:07 ] |
Post subject: | motor problem |
Hi .need some help.i run a 13.5 t gm with hobbywing stock speedo.last week it started going slow after some running.switch of and on and will be ok for a bit but same thing.changed sensor wire and still not fixed.then checed setting.changed battery and checked wires.my mate runs all the same as me and..no problem.i cant find the sensor bord no more and dont know what els to check. Thanks |
Author: | Skiddins [ Sat Feb 16, 2013 13:19:09 ] |
Post subject: | Re: motor problem |
Is anything getting hot very quickly? Try taking the motor apart and cleaning it out, then carefully putting it back together making sure all the shims go in correctly. Skiddins |
Author: | YELLOWSHARK [ Sat Feb 16, 2013 14:51:48 ] |
Post subject: | Re: motor problem |
May well need resynching with your transmitter - which you do not mention; I speak from Tekin experience not Hobbywing which I do not run. I have had a couple of experiences where the motor ran fine but the turbo would not kick in; resynching solved it. |
Author: | phillip46 [ Sat Feb 16, 2013 14:54:16 ] |
Post subject: | Re: motor problem |
Hi.i will do so and see what it does.thanks. |
Author: | UrabusDenis [ Sat Feb 16, 2013 16:12:34 ] |
Post subject: | Re: motor problem |
Try turning off temperature cut-off on your speedo- it doesn't work with motors other then Hobbywing |
Author: | kevinkirk [ Tue Feb 19, 2013 22:04:49 ] |
Post subject: | Re: motor problem |
Also check the voltage cut off point. I have disabled mine after cutout problems. the ESC senses the voltage of each cell and not the pack total. Kevin |
Author: | phillip46 [ Tue Feb 19, 2013 22:39:52 ] |
Post subject: | Re: motor problem |
Hi.did as sugested and seems to be ok.went to the track today to test.my car just makes 5 minuuts but my mate cak run much longer.i know to run for 5 min but just makes me think somthings rong.somone els told me about the cutoff aswell so will give it a go on sat.thanks for the advice. |
Author: | YELLOWSHARK [ Wed Feb 20, 2013 03:24:20 ] |
Post subject: | Re: motor problem |
I am sure this isn't the problem but on the basis of your last post I think the ? needs asking - what is the capacity of your LIPO? |
Author: | Nikos Georgiadis [ Wed Feb 20, 2013 10:23:01 ] |
Post subject: | Re: motor problem |
I thing the problem is the motor gearing or something wrong on hobbywing setup. Ifyou want send as you speedo setup. Also tell as what rotor has your motor? |
Author: | coastal [ Wed Feb 20, 2013 21:06:51 ] |
Post subject: | Re: motor problem |
Author: | phillip46 [ Thu Feb 21, 2013 11:20:49 ] |
Post subject: | Re: motor problem |
Hi.my speedo setup. Version.110930 stock 1-for-brake 2-0 3-2.8 4-6 punch 5-75% 6-50% 7-0% 8-6% 9-36º 10-18 11-enable 12-30º 13-5000rpm 14-off 15-400 I have a 84t spur and 30t pinion.my car is a t3 12. I am running it at west london track wich is out doors getting reddy for summer.my mate and his brother runs exactly the same exsept they have 27t pinion.have fitted one now to try.my batterys are 5300ma and 50 c.i have tried their batterys on my car.will be testing on sat.thanks. |
Author: | Nikos Georgiadis [ Fri Feb 22, 2013 19:35:20 ] |
Post subject: | Re: motor problem |
Author: | phillip46 [ Sun Feb 24, 2013 00:27:39 ] |
Post subject: | Re: motor problem |
Hi.i did wat was sugested and changed to 27t pinion.changed speedo settings but left turbo delay of.seems fine now.thanks to all for the help. |
Author: | UrabusDenis [ Mon Feb 25, 2013 01:07:13 ] |
Post subject: | Re: motor problem |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |