XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Xray T4 first works https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13364 |
Page 1 of 1 |
Author: | Ruben_qlc [ Sun Feb 03, 2013 02:59:17 ] |
Post subject: | Xray T4 first works |
Hello. I would like to know which thinks you do, when you have the T4 new car. I know something: - Glue the edge of the chassis and top deck. - Hole in the cap of shocks for better rebound adjustment What do you think? |
Author: | riketsu [ Sun Feb 03, 2013 17:43:09 ] |
Post subject: | Re: Xray T4 first works |
I always glue the edges of both, and even the servo mount. If I'm not mistaken, the shocks come with the hole in the cap. |
Author: | Ruben_qlc [ Sun Feb 03, 2013 20:25:59 ] |
Post subject: | Re: Xray T4 first works |
Thank you riketsu. Anything else? |
Author: | riketsu [ Mon Feb 04, 2013 23:11:11 ] |
Post subject: | Re: Xray T4 first works |
Get the graphite bumper upper holder brace. A brace is better than a new chassis. Use a tiny bit of threadlock in the metal-to-metal screws. Use socket head screws in the motor and motor bulkhead. Also, tighten the screws in the order as the manual says. |
Author: | Ruben_qlc [ Wed Feb 06, 2013 02:33:38 ] |
Post subject: | Re: Xray T4 first works |
Use a tiny bit of threadlock in the metal-to-metal screws??? Can you tell me an example? Thank you. |
Author: | Hagberg [ Mon Mar 11, 2013 18:49:07 ] |
Post subject: | Re: Xray T4 first works |
You can glue the edges of the chassis for better durability, but that's all. Threadlock is not needed anywhere except for the small setcrew in the driveshaft couplings. |
Author: | Ruben_qlc [ Thu Mar 14, 2013 01:33:40 ] |
Post subject: | Re: Xray T4 first works |
Ok, thank you Alex ! |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |