XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T4 Minimum Gearing https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13342 |
Page 1 of 1 |
Author: | Nathan Wilson [ Wed Jan 23, 2013 11:49:42 ] |
Post subject: | T4 Minimum Gearing |
Hi guys, i run at small indoor tracks and it appears the lowest gearing i can fit is a 20 pinion and 84 (Kit spur) 48dp. i would like to maybe try lower, is there anyway to fit a smaller pinion? or whats the maximum spur i can fit on without it catching? Thanks |
Author: | Skiddins [ Wed Jan 23, 2013 12:11:06 ] |
Post subject: | Re: T4 Minimum Gearing |
I'm pretty sure I managed to fit at least a 19t pinion on with kit spur. I have a sheet at home and will look later. The biggest spur is an 86t otherwise it will start to stick out the bottom. Skiddins |
Author: | Hagberg [ Fri Jan 25, 2013 21:53:27 ] |
Post subject: | Re: T4 Minimum Gearing |
The limit is usually that the motor can hit the layshaft bulkhead or topdeck. A gear ratio around 9.5 shouldn't be a problem. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |