| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Xray T4 motor help https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13207 |
Page 1 of 1 |
| Author: | yunowill [ Fri Dec 28, 2012 09:40:47 ] |
| Post subject: | Xray T4 motor help |
Hey guys I just recently picked up my T4 and currently in the middle of the build . The car is awsome and is going together nicely ....no complaints . Anyways I am going to be running a 17.5 turn blinky class with the car at my local track ....I am here to ask you guys what is the best 17.5 turn motor that you have used or are currently running . Just out on the hunt for a motor so I would just like to hear some feed back on what you guys think on the 17.5 turn motors and what would be best . I am running on carpet if that makes any difference . Thanks in advance . |
|
| Author: | Bytestream [ Fri Dec 28, 2012 18:31:43 ] |
| Post subject: | Re: Xray T4 motor help |
Pick up a Trinity D3.5, it's what most people are running these days. |
|
| Author: | bresser1 [ Fri Dec 28, 2012 21:18:34 ] |
| Post subject: | Re: Xray T4 motor help |
Hello, The trinity d3 motors are perfect But have a long rotor/shaft. In my t4 The rotor is so long it touches The lipo battery. I need to shim THE motor with a 1 or 1.5 mm shim to fit. Good luck. |
|
| Author: | yunowill [ Mon Dec 31, 2012 10:49:17 ] |
| Post subject: | Re: Xray T4 motor help |
Sweet I think I am going to go with the team epic i have been hearing great things about it ... on another note what are you guys running for your spur and pinion for the 17.5 class on your t4's ? Thanks, |
|
| Author: | Hagberg [ Wed Jan 02, 2013 15:17:41 ] |
| Post subject: | Re: Xray T4 motor help |
The ORCA TX has been getting good results too. A good starting point for gear ratio should be around 5.0:1 for 17.5T blinky. |
|
| Author: | yunowill [ Thu Jan 03, 2013 03:04:22 ] |
| Post subject: | Re: Xray T4 motor help |
| Author: | spotlessdragon [ Thu Jan 03, 2013 18:45:24 ] |
| Post subject: | Re: Xray T4 motor help |
use kit spur and a 32 pinion for 4.99 |
|
| Author: | Hagberg [ Mon Jan 14, 2013 12:44:40 ] |
| Post subject: | Re: Xray T4 motor help |
If 64 pitch is used try 100 spur with 37 pinion. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|