Sharpening up the steering at Corner Entry

Skiddins · **Posted:** Mon Dec 17, 2012 14:34:57

I need some help to try and improve my corner entry steering;

Ignore the missed apex's :mrgreen:

I seemed to have to scrub more corner speed than some of the others.
In ultimate lap times I was around 0.5s off the very fastest laps (Ollie Jeffries, Elliot Harper etc) and the only thing I could see watching their cars was that they had plenty of steering despit not slowing quite so much for the corners.

I will link to my setup sheet later.

Green Wing · **Posted:** Mon Dec 17, 2012 14:54:35

Hello Skiddins,

thanks for the video. Really nice facility and layout. I have an idea but would like to wait for your setup first.

Green Wing

Skiddins · **Posted:** Mon Dec 17, 2012 16:05:15

Green Wing · **Posted:** Mon Dec 17, 2012 17:24:36

First I would try 7/5 on the downstops, then 2.5-2.8C front springs and finally 0° toe in the front. To me it seems that your car rolls a bit too much so it is a little heavy through the S in fornt of the drivers' stand. Is there any room for placing the wing a little more backward? Maybe 4-5mm?

Skiddins · **Posted:** Mon Dec 17, 2012 18:29:29

Jimmy Maddison · **Joined:** Tue Nov 20, 2012 19:02:15 **Posts:** 2

hi Damien, its alls down to the top link settings, go down on the links to 1mm on the front and 0 on the rear

i would also run thicker oil too see my latest set up.

cheers
j

Green Wing · **Posted:** Mon Dec 17, 2012 22:44:27

coastal · **Joined:** Sat Oct 20, 2012 17:17:10 **Posts:** 91

ADRIAN WEBB · **Joined:** Wed Apr 18, 2012 14:41:09 **Posts:** 31

Jimmy Maddison · **Joined:** Tue Nov 20, 2012 19:02:15 **Posts:** 2

XRAY - Model racing cars

Sharpening up the steering at Corner Entry

Who is online