| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| new T4 chassis plate tweaked https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13192 |
Page 1 of 1 |
| Author: | Nico' [ Fri Dec 21, 2012 19:42:56 ] |
| Post subject: | new T4 chassis plate tweaked |
Hi, I have problems with T4 chassis plates, I checked tweak when they are just out of the box and the first one I got with my T4 was tweaked so I ordered to "T3 shop" in Germany ( I leave in France) a second chassis plate and it is worse! I look on a glass and the middle rises of 0,5mm and the rear left of 0,5mm too, rear right is 0,2mm heightened. So is it normal please? I don't think so... what to do is such cases please? best regards, Nicolas Rouland |
|
| Author: | Nt1Mase [ Sat Dec 22, 2012 09:35:33 ] |
| Post subject: | Re: new T4 chassis plate tweaked |
I had the same problem. I phoned the UK distributor who said it's very rare and they have only had a few new chassis being twisted. I sent him some pictures of the condition to show I hadn't written it off at the end of the straight. After they got it they confirmed I had a twisted chassis and sent me out a replacement free of charge. I had the same thing, I put the chassis on a flat glass and if I press down underneath the battery it would rise the opposing side a lot. Also the back of my chassis wasnt touching the glass at all lol. |
|
| Author: | YELLOWSHARK [ Sun Dec 23, 2012 14:43:35 ] |
| Post subject: | Re: new T4 chassis plate tweaked |
Interesting, this subject, about new chassis plates, has appeared on the forum 2 or 3 times in the past couple of months and and I do not really recall this ever having come up before in my time on the forum, which will be 5 years or so. Maybe the manufacturing process has changed?? |
|
| Author: | Nt1Mase [ Sun Dec 23, 2012 22:15:30 ] |
| Post subject: | Re: new T4 chassis plate tweaked |
Even the second chassis that RcDisco sent me had the slightest of tweak but I got rid of it by pressing down on the shock towers while doing the top deck up. It's strange for sure. |
|
| Author: | Hagberg [ Mon Dec 24, 2012 01:07:40 ] |
| Post subject: | Re: new T4 chassis plate tweaked |
I only saw two bent chassis plates in the last 8 years. One time it had to be sent back as it clearly wasn't right from the factory. One time I could bend it to be straight with my hands. Don't ask me why but in some cases this will work. |
|
| Author: | valentin lehmann [ Fri Dec 28, 2012 22:33:36 ] |
| Post subject: | Re: new T4 chassis plate tweaked |
Hi, My first chassis plate was a little bit tweaked, but I didn't know if it was originally tweaked or if it has been tweaked in a crash. I bought a new one and it seems to be perfectly flat. |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|