XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T4 shock problem https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13140 |
Page 1 of 1 |
Author: | josh [ Mon Dec 03, 2012 16:41:15 ] |
Post subject: | T4 shock problem |
Hi Mr.Hudy i have a problem with the T4 shock. after every race i found my shock with a 0% rebound9 (i start with a 25%). i think in a lack of oil. This trouble interests also my friends with T4. |
Author: | Skiddins [ Mon Dec 03, 2012 16:46:58 ] |
Post subject: | Re: T4 shock problem |
Author: | josh [ Mon Dec 03, 2012 16:54:36 ] |
Post subject: | Re: T4 shock problem |
i don't understand. I build them as in the manual. the set-up for asphal sais rebound to 25%... Well i do it anda after a race (6 batteries) i found them to a 0% rebound. is it normal? |
Author: | Skiddins [ Mon Dec 03, 2012 19:30:15 ] |
Post subject: | Re: T4 shock problem |
If I build them with a certain amount of rebound. After a while the amount of rebound reduces (sometimes down to 0%). If there isn't any air getting into the shocks they are fine. Most people are after only a small amount of rebound anyway. |
Author: | YELLOWSHARK [ Tue Dec 04, 2012 02:38:58 ] |
Post subject: | Re: T4 shock problem |
My experience with all XRAY shocks (excluding T4 shocks - but I doubt they are different in this context) is that I set them to 90-100% rebound and after 6 batteries the rebound will be down to 25% or less. For important meetings I will always check before qualie 3 and if necessary re-oil back to 100% rebound. |
Author: | Martin Hudy [ Tue Dec 04, 2012 08:08:49 ] |
Post subject: | Re: T4 shock problem |
Hi Josh, Skiddins is correct, if you have problem to set the shocks on 0% rebound, set the rebound that the shock shaft extends approx. 25% and after while the rebound will decrease to 0% The reason why u can not adjust 0% rebound directly can be caused that u move with the shock shaft too quick while adjusting rebound. U need to move very slow and do not tight the cap too hard, it is enough to tight gently. |
Author: | josh [ Tue Dec 04, 2012 09:51:13 ] |
Post subject: | Re: T4 shock problem |
Hi martin thank you for answer, so I try to understand...i have first to set a 50% rebound in order to have than a 25%? When at the end of a race the shock are to 0% but without air bubbles , are they fine?or must I re-fill them? |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |