Oops very sorry, 3.0 indeed. I have a 2.5 which I do not use for anything and had a brain malfunction
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| XRAY T2 HELP https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13128 |
Page 1 of 1 |
| Author: | kurt88c [ Thu Nov 29, 2012 03:06:00 ] |
| Post subject: | XRAY T2 HELP |
i have the first xray t2 and need help with finding what size hex the screws are so if anyone knows what size they are any help would be appreciated cheers kurt |
|
| Author: | brano [ Thu Nov 29, 2012 08:13:38 ] |
| Post subject: | Re: XRAY T2 HELP |
I suggest you will check your instruction manual (or you can download it from the Download section under each car, here is the link where you can find all cars listed http://www.teamxray.com/teamxray/produc ... tName=Cars) where you have each section or step where you can find the sizes of screws. you will need Allen wrenches 1.5mm, 2.0mm, 2.5mm and 3.0mm |
|
| Author: | kurt88c [ Fri Feb 01, 2013 11:35:22 ] |
| Post subject: | Re: XRAY T2 HELP |
Do t3'12 shocks fit the first t2 |
|
| Author: | YELLOWSHARK [ Fri Feb 01, 2013 22:07:55 ] |
| Post subject: | Re: XRAY T2 HELP |
You need 2mm for all screws except 2.5mm for the shock absorber connections 1.5mm for the pinion screw and maybe the roll bar end connectors (if not it will be 2mm) |
|
| Author: | MikeA [ Fri Feb 01, 2013 22:45:33 ] |
| Post subject: | Re: XRAY T2 HELP |
That's 3.0mm you need for the shockabsorber connections. Mike |
|
| Author: | YELLOWSHARK [ Sat Feb 02, 2013 03:17:25 ] |
| Post subject: | Re: XRAY T2 HELP |
Oops very sorry, 3.0 indeed. I have a 2.5 which I do not use for anything and had a brain malfunction
|
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|