airtronics 94357
| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Tony or Alex - Servos? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=131 |
Page 1 of 1 |
| Author: | sf05 [ Wed Sep 22, 2004 02:18:54 ] |
| Post subject: | Tony or Alex - Servos? |
Tony or Alex - what servo brands and model numbers do most of the team drivers use in the xRay? I know high speed but I would like to get exact model numbers, preferably airtronics. Thanks, X |
|
| Author: | ALBERTO [ Wed Sep 22, 2004 04:28:08 ] |
| Post subject: | |
airtronics 94357
|
|
| Author: | Tonyv [ Wed Sep 22, 2004 11:34:00 ] |
| Post subject: | |
We all use different ones, but generally they are the fast versions of the top of the range servos of each manufacturor (i.e. in the 0.07s to 0.09s range). Personally I currently use the Sanwa Digital ERG WRX servo. I have also used the Futaba S9404. Both are very good. Perhaps the other team drivers can add which servo they currently run? |
|
| Author: | apolloa [ Wed Sep 22, 2004 20:14:11 ] |
| Post subject: | |
| Author: | Hagberg [ Thu Sep 23, 2004 12:37:35 ] |
| Post subject: | |
Futaba 9550 is small,fast and reliable. |
|
| Author: | Sam_Smith [ Thu Sep 23, 2004 13:17:40 ] |
| Post subject: | |
I am not a team driver but I use the KO 2363 (or you could just get the 2343) as the only difference is that mine has a heat sink. I got it brand new and delivered to my door for under £70 HTH Sam |
|
| Author: | Peter Szuhai [ Thu Sep 23, 2004 13:31:59 ] |
| Post subject: | |
Futaba 9550 is a Digital Wing Servo, I think S9450 Hi Speed is better for Car. |
|
| Author: | Andreas Myrberg [ Thu Sep 23, 2004 14:24:07 ] |
| Post subject: | |
I'm using the Futaba s9550, it's smaller so you have some room for example a reciever or transponder beside the servo. And the performance is way sufficiant. Best regards Andreas Myrberg |
|
| Author: | darrenic [ Thu Sep 23, 2004 20:39:03 ] |
| Post subject: | Where'd you get it |
[quote="Sam_Smith"]I am not a team driver but I use the KO 2363 (or you could just get the 2343) as the only difference is that mine has a heat sink. I got it brand new and delivered to my door for under £70 HTH Sam[/quote]  Where did you pick your KO 2363 Sam?
I ask as under £70 is really good. |
|
| Author: | apolloa [ Thu Sep 23, 2004 21:00:17 ] |
| Post subject: | |
darrenic, Don't know if it helps but I got my 2343 from ebay brand new for £79.95 Try rchopups.com |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|