The easy option is to drill new holes. You will need to countersink the bottom to get it flush, us a 10m drill bit in your hand, turn it slowly till the screw head can sit flush. A countersink bit on plastic doesnt work very well as they are designed for wood.
Servo tape. Thin stuff like the "selotape trim tape" about 0.5mm thick . not the thick white foam stuff, thats hopeless.
Or you could glue it in place with those glue sticks.(this is what I did with my wiring) The type you can peel off when you need to. The glue has an almost candle wax feel to it.
|