XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T3 11 Wet Set-Up https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13089 |
Page 1 of 1 |
Author: | The Eagle [ Mon Nov 12, 2012 20:58:01 ] |
Post subject: | T3 11 Wet Set-Up |
Hi Everyone, With me living in the North of Scotland my summer season often has lots of rain. My clubs final round nearly being cancelled due to very heavy rain. With me being quite new to outdoors racing i have limited experience of wet racing and set-up so i was wondering if anyone could give me some wet set-up advise on a track that has long sweeping corners, a very long straight, heavy breaking zones, a fast chicane and a tight hairpin. |
Author: | Skiddins [ Mon Nov 12, 2012 22:31:06 ] |
Post subject: | Re: T3 11 Wet Set-Up |
Along the lines you need ![]() |
Author: | YELLOWSHARK [ Tue Nov 13, 2012 03:12:20 ] |
Post subject: | Re: T3 11 Wet Set-Up |
Also... It may not be obvious to you from Skiddings setup sheet but if you have unavoidable standing water I would suggest you need to increase your standard ride height by at least .5mm, maybe more. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |