XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T4 xray floating servo??? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13063 |
Page 1 of 1 |
Author: | boggsy [ Wed Nov 07, 2012 08:51:25 ] |
Post subject: | T4 xray floating servo??? |
Hi my t4 Servo mount I just noticed is not letting my servo float. I have a KO Propo RSX ONE10 servo which is very high quality. Can anyone shed light please on what to do? It would seem weird if I put spacers on the servo mount on the chassis ![]() ![]() |
Author: | Skiddins [ Wed Nov 07, 2012 11:22:35 ] |
Post subject: | Re: T4 xray floating servo??? |
Is that a particularly big servo? It probably doesn't matter if it's just touching the chassis, the important thing with the new mount is that isn't fixed on the outside of the chassis. Skiddins |
Author: | Bytestream [ Wed Nov 07, 2012 18:33:21 ] |
Post subject: | Re: T4 xray floating servo??? |
I run the KO Propo Rsx Response servo, which looks to be the same measurements where is counts and have quite a bit of room (1 1/2 - 2mm) to move it up or down. I actually moved it down because in the very top position the steering link to the bridge was hitting the top deck. I probably have 1mm right now between the bottom of the servo and the chassis. |
Author: | boggsy [ Thu Nov 08, 2012 06:34:15 ] |
Post subject: | Re: T4 xray floating servo??? |
Author: | Bytestream [ Thu Nov 08, 2012 08:26:13 ] |
Post subject: | Re: T4 xray floating servo??? |
Author: | Hagberg [ Thu Nov 08, 2012 09:12:16 ] |
Post subject: | Re: T4 xray floating servo??? |
Loosen the screws and push it towards the top of the mount. I am using this servo and its floating with a few mm's to spare. |
Author: | boggsy [ Thu Nov 08, 2012 20:24:57 ] |
Post subject: | Re: T4 xray floating servo??? |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |