| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| T3 2012 Wet Set-up https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13027 |
Page 1 of 1 |
| Author: | Delboy [ Sun Oct 28, 2012 18:38:19 ] |
| Post subject: | T3 2012 Wet Set-up |
I would be most grateful if someone could advise me on the set-up for the ESC for a WET (no puddles) asphalt track when using a Tekin RS Pro with an LRP X12 13.5T motor. Regards and Many thanks |
|
| Author: | Skiddins [ Sun Oct 28, 2012 23:37:25 ] |
| Post subject: | Re: T3 2012 Wet Set-up |
It's for my '009, but it might help with some idea's; |
|
| Author: | Delboy [ Mon Oct 29, 2012 11:41:53 ] |
| Post subject: | Re: T3 2012 Wet Set-up |
Hi Skiddins Many thanks - I found your mechanical set-up very useful but would like some help with the Tekin RS Pro settings for a wet (no puddles) asphalt track so if anyone has some Tekin data they are willing to share I would be most grateful. You can always PM me. Thanks! |
|
| Author: | YELLOWSHARK [ Mon Oct 29, 2012 12:21:05 ] |
| Post subject: | Re: T3 2012 Wet Set-up |
Hi Dellboy, my standard move is to dial in 20% negative throttle curve on the transmitter. I guess using a less agressive setting on the Tekin throttle profile would do a similar thing too but I have never tried that. |
|
| Author: | Delboy [ Mon Oct 29, 2012 15:36:12 ] |
| Post subject: | Re: T3 2012 Wet Set-up |
Hi Yellowshark - good advice. What about current setting, boost and turbo? Should these remain the same? Thanks and regards |
|
| Author: | YELLOWSHARK [ Tue Oct 30, 2012 13:30:52 ] |
| Post subject: | Re: T3 2012 Wet Set-up |
I leave them as is. Whether that is good or bad I have no idea  If I were still having trouble putting the power down, I think my next step would be to add a tooth or two to the pinion. I suppose I might also reduce the boost rev range by 1 or 2 K. I believe, although I am not sure on this, that bringing the timing in earlier would reduce the torque (probably depends on the motor as to whether this is a good idea).
|
|
| Author: | Delboy [ Tue Oct 30, 2012 14:42:53 ] |
| Post subject: | Re: T3 2012 Wet Set-up |
Many thanks Yellowshark - sound advice ! Regards |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|