XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
center servo mount https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=13015 |
Page 1 of 1 |
Author: | Osorron [ Tue Oct 23, 2012 21:40:00 ] |
Post subject: | center servo mount |
hello, i have a problem with the servo mount for the t3'12, the problem is that it turns clockwise. i can even move it with the hand without almost any efort. i thin i mount it correctly but i have to take it off because the car didnĀ“t go straight. thanks sorry about my english |
Author: | Andrew Webber [ Wed Oct 24, 2012 00:35:06 ] |
Post subject: | Re: center servo mount |
Its a unfortunate disadvantage with the optional T3 steering mount that the servo has the ability to move in a heavy crash. Only solution I could come up with was to place a piece of double sided servo tape under the servo. It will help keep the servo from moving. If its still a problem then I'd recommend going back to the original mounting setup. Cheers Andrew |
Author: | Osorron [ Wed Oct 24, 2012 00:38:54 ] |
Post subject: | Re: center servo mount |
thanks for your reply. ![]() |
Author: | Hagberg [ Wed Oct 24, 2012 10:26:43 ] |
Post subject: | Re: center servo mount |
We have been using Shoe-goo too with great success in the past. |
Author: | Osorron [ Wed Oct 24, 2012 10:53:26 ] |
Post subject: | Re: center servo mount |
Hello, i have already put the original mount, i think its better. Thanks for the reply Cde |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |