XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
T4, Tweaked/bent chassisplate? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12966 |
Page 1 of 1 |
Author: | Facelift [ Fri Oct 12, 2012 17:51:20 ] |
Post subject: | T4, Tweaked/bent chassisplate? |
Hi Maybee I'm to accurate about this... But all my T3'11,'12 and now the T4 all has come with a slightly bent chassisplate. I've taken the plate on several different flat surfaces and it's the same on all. When I push down at the back end, it's lifting in front. Is it supposed to be like this? Thanks for answer Fred |
Author: | Hagberg [ Mon Oct 15, 2012 17:34:13 ] |
Post subject: | Re: T4, Tweaked/bent chassisplate? |
Since I started driving XRAY cars, 8 years ago, I have only seen one chassis to be slightly warped from the factory. The reason for this, I don't really know. If you have this problem, you should contact either your distributor, or XRAY directly, I am sure that they will replace it for you: info@teamxray.com |
Author: | Butuzov Alexey [ Tue Oct 16, 2012 07:36:17 ] |
Post subject: | Re: T4, Tweaked/bent chassisplate? |
chassis deforms when you begin to fasten the screws. This happens on all models XRAY in recent years. And I do not mean to malfunction. This occurs because the screw heads spreads the carbon and chassis is begins to deform. |
Author: | Facelift [ Tue Oct 16, 2012 11:29:44 ] |
Post subject: | Re: T4, Tweaked/bent chassisplate? |
Author: | Delboy [ Tue Oct 16, 2012 12:40:31 ] |
Post subject: | Re: T4, Tweaked/bent chassisplate? |
Author: | Green Wing [ Wed Oct 24, 2012 17:36:30 ] |
Post subject: | Re: T4, Tweaked/bent chassisplate? |
Author: | Bluejay [ Sun Nov 04, 2012 21:34:07 ] |
Post subject: | Re: T4, Tweaked/bent chassisplate? |
I had the same issue with my current T4 build. After sanding the excess ca glue of along the edges with a 400 grain sandpaper, the slight tweak was gone. |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |