Hey,
I am really very satisfied with the T4, I had only one wish or note. Could not make the damper membrane so that we can put this without problems on the filled dampers? Currently, this is pressed lightly. With the Ellen method, it takes too much time to get four absolutely same damper.
Would like to do this: 1. fill the damper 2. bleed 3. Flask on desired rebound position 4. Hang up Membrane carefully and remove excess oil 5. touched down Shock cap and tighten carefully I have always done this with other dampers and the damper suppl. were 4 perfect and that super-fast.
Sincerely yours
Scotty
|