XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Factory kit battery placement https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=129 |
Page 1 of 1 |
Author: | crisis641 [ Tue Sep 21, 2004 17:38:40 ] |
Post subject: | Factory kit battery placement |
Author: | Corey Bernardo [ Tue Sep 21, 2004 21:34:31 ] |
Post subject: | |
Author: | Tonyv [ Tue Sep 21, 2004 22:43:02 ] |
Post subject: | |
Author: | John Reid [ Tue Sep 21, 2004 23:00:51 ] |
Post subject: | |
Not true, you can use the original mounts for that configuration. I used it indoor for a few events. The strap sits at a slight angle and it works fine. Keep trying and you will find the holes that work. will try to find a picture.... |
Author: | John Reid [ Tue Sep 21, 2004 23:43:20 ] |
Post subject: | |
Hope this helps.. |
Author: | crisis641 [ Wed Sep 22, 2004 17:26:13 ] |
Post subject: | |
Author: | John Reid [ Wed Sep 22, 2004 21:26:20 ] |
Post subject: | |
Author: | Tonyv [ Thu Sep 23, 2004 13:20:15 ] |
Post subject: | |
That's why you need the 6 cell brace. It uses the hole just to the left of the hole John uses. That hole is not blocked even if you run the short arms. |
Author: | NismoSkyline17 [ Fri Oct 01, 2004 04:53:39 ] |
Post subject: | |
Author: | daltonshop [ Fri Oct 01, 2004 13:44:01 ] |
Post subject: | |
Author: | Timmymontoya [ Mon Oct 04, 2004 06:52:17 ] |
Post subject: | |
Author: | Rick Thomson [ Mon Oct 04, 2004 11:41:16 ] |
Post subject: | |
Author: | Tonyv [ Mon Oct 04, 2004 11:46:07 ] |
Post subject: | |
Author: | Timmymontoya [ Tue Oct 05, 2004 07:11:15 ] |
Post subject: | |
Thank you for the replys but i did run into another problem.. the battery hits the front lower holder that holds the pivot pin in? Am i doing something wrong? I have the stock FK chassis... Thanks again for your help!! |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |