XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Problem with Front Sway Bars https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=1283 |
Page 1 of 2 |
Author: | nnick [ Mon Mar 28, 2005 09:21:44 ] |
Post subject: | Problem with Front Sway Bars |
Author: | nnick [ Mon Mar 28, 2005 14:59:49 ] |
Post subject: | |
Come on guys, 20 have seen this post and no reply??? We have a problem here please give us a hint!! Should we return them to the lhs and wait for the correct sets? Tony, Mario? Nick |
Author: | Tonyv [ Mon Mar 28, 2005 15:28:15 ] |
Post subject: | |
Author: | nnick [ Mon Mar 28, 2005 15:33:30 ] |
Post subject: | |
Author: | Tonyv [ Mon Mar 28, 2005 15:40:36 ] |
Post subject: | |
Author: | nnick [ Mon Mar 28, 2005 15:44:52 ] |
Post subject: | |
Author: | Tonyv [ Mon Mar 28, 2005 18:55:45 ] |
Post subject: | |
Author: | nnick [ Mon Mar 28, 2005 19:01:57 ] |
Post subject: | |
Author: | harris [ Mon Mar 28, 2005 20:20:52 ] |
Post subject: | |
Hello to everyone, Tony thank you for the answer but here we have 3 sets came directly from the factory and we dont know what to do.. Mario please help us with this issue, It is strange because nowhere it is said that two out of three sizes must be different. The codes given to FK05 for the sway bars are exactly the same as the previous version. thank you Harris |
Author: | mario [ Mon Mar 28, 2005 22:05:19 ] |
Post subject: | |
Author: | Antonis [ Tue Mar 29, 2005 07:27:20 ] |
Post subject: | |
Author: | Antonis [ Tue Mar 29, 2005 07:30:39 ] |
Post subject: | |
Author: | nnick [ Tue Mar 29, 2005 11:12:51 ] |
Post subject: | |
Here are the pictures that might clarify the issue 2mm 1.5mm 1mm 2mm on top of 1.5mm 2mm on top of 1mm Nick |
Author: | John Reid [ Tue Mar 29, 2005 12:53:44 ] |
Post subject: | |
As Mario has said, there obviously has been slight changes to the production design. Geometricaly they will work exactly the same. its all about leverage. The angle isnt important as long as the bar is flat and the "ground" part is the same profile the effect of the bar will be the same. When fitting the bar to the car make sure the link is as close to verticle as possible to give the best movement, if it is angled slightly you are puting loads into it that you dont need and may cause binding. With both bars you can get the link nice and free to move so it isnt a problem. ![]() |
Author: | nnick [ Tue Mar 29, 2005 13:41:57 ] |
Post subject: | |
My sway bars are of the old style. Will the new style provide any difference while driving or not? Thank you Nick |
Author: | Tonyv [ Tue Mar 29, 2005 14:05:48 ] |
Post subject: | |
None that I am aware of. |
Author: | harris [ Tue Mar 29, 2005 15:51:54 ] |
Post subject: | |
Author: | chaz [ Tue Mar 29, 2005 17:24:55 ] |
Post subject: | |
Author: | nnick [ Tue Mar 29, 2005 17:34:37 ] |
Post subject: | |
Author: | chaz [ Tue Mar 29, 2005 18:04:45 ] |
Post subject: | |
Page 1 of 2 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |