XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
Servo nub on chassis https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12801 |
Page 1 of 1 |
Author: | Matt W [ Mon Aug 27, 2012 14:20:43 ] |
Post subject: | Servo nub on chassis |
Hi, I know a lot of drivers now stick down the servo or use the centre servo mount but Is there much benifit in cutting off the nub on the side of the chassis or will you not really notice much difference in the handling? |
Author: | Hagberg [ Mon Aug 27, 2012 14:50:47 ] |
Post subject: | Re: Servo nub on chassis |
If the track has many left-hand high speed corners you are going to notice that the car will stop less due to less scrubbing in those corners. It will not make a huge difference however. |
Author: | Matt W [ Mon Aug 27, 2012 16:13:22 ] |
Post subject: | Re: Servo nub on chassis |
thanks alex, whats the best method of cutting it off, using a hacksaw or perhaps grinding it down? |
Author: | Hagberg [ Mon Aug 27, 2012 16:16:11 ] |
Post subject: | Re: Servo nub on chassis |
Cutting disc on a dremel and just cut it off in line with the chassis. |
Author: | ChrisP [ Fri Aug 31, 2012 15:46:52 ] |
Post subject: | Re: Servo nub on chassis |
Just a quick reminder for proper eye protection, ventilation, gloves and a mask when working with cutting CF |
Author: | Bigz84 [ Mon Sep 03, 2012 21:47:06 ] |
Post subject: | Re: Servo nub on chassis |
i just did this alteration, and i also glued the edge w/ ca and black markered over that to make it look like nothing was done. Just makes it look "stock". |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |