| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| no rear grip on t3 12 https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12754 |
Page 1 of 1 |
| Author: | moggy12 [ Fri Aug 03, 2012 08:40:26 ] |
| Post subject: | no rear grip on t3 12 |
hi i race on indoor carpet set up is xray carpet setup apart from 40 weight shock oil f+r ,rear shock on inner most setting 5.5mm ride height the problem is first 2 rounds i just don't have any rear grip i know you get more grip from more rubber being put down but would like more rear grip from round 1 by round 3/4 car is well set up with plenty rear grip is there anything i can change on car to get intant rear grip from round 1 ? i use sorex 28 jb tyres thanks |
|
| Author: | Hagberg [ Mon Aug 06, 2012 17:44:45 ] |
| Post subject: | Re: no rear grip on t3 12 |
Please post your entire set-up sheet. This way we can find a solution to your set-up problem. |
|
| Author: | moggy12 [ Mon Aug 06, 2012 20:16:49 ] |
| Post subject: | Re: no rear grip on t3 12 |
hi its the standard xray carpet set up apart from 2000 diff oil, rear shocks on inner most hole, rear camber -2, 40 weight shock oil f&r, sorex 28jb tyres thanks for any replys |
|
| Author: | Hagberg [ Tue Aug 07, 2012 18:36:17 ] |
| Post subject: | Re: no rear grip on t3 12 |
You can try softer rear diff oil. 1K or even lighter oil will make the car easier to drive on-power. I would also suggest you to try front downstop 6 and rear 5. Try a softer front spring, 2.8 instead of 3. Remove your ackerman shim. Try a longer rear link on the upper bulkheads. |
|
| Author: | moggy12 [ Wed Aug 08, 2012 09:22:14 ] |
| Post subject: | Re: no rear grip on t3 12 |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|