| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Optional solid rear block https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12715 |
Page 1 of 1 |
| Author: | Matt W [ Wed Jul 11, 2012 22:28:50 ] |
| Post subject: | Optional solid rear block |
Ive always had trouble getting even rear toe left to right so have purchased the solid rear block. With the new block the gauges say that I now have 2.5 degrees left and right. Do I need to add a 0.4mm shim to both sides or is it mostly likely that the gauges are not a hundred percent accurate? |
|
| Author: | Skiddins [ Wed Jul 11, 2012 23:03:36 ] |
| Post subject: | Re: Optional solid rear block |
Depends on the gauges. I have also noticed that if I have the gauges the other way around, so I have the back of the car towards me and I can still read the numbers on the toe measuring plate that sits across the top, I get different readings from when I have the front of the car facing me and can still read the numbers on the toe measuring plate (Plate and rear gauges reversed)  Skiddins |
|
| Author: | Green Wing [ Sat Jul 14, 2012 11:24:33 ] |
| Post subject: | Re: Optional solid rear block |
| Author: | Hagberg [ Wed Jul 18, 2012 23:58:17 ] |
| Post subject: | Re: Optional solid rear block |
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|