XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
xray t3 2012 set up https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12688 |
Page 1 of 1 |
Author: | moggy12 [ Fri Jun 22, 2012 09:11:41 ] |
Post subject: | xray t3 2012 set up |
hi to all my xray t3 2012 is all set up shocks are equal length all adjusted for 5mm ride height droop all the same but when i check tweak by lifting rear of car under chassis to see if both tyres leave the ground at the same time they do not , side that lifts first i tighten front opposite shock and loosen other front shock i do this for the front aswell by lifting under front of chassis and adjusting rear shocks i do then get all front and rear tyres leaving the ground at the same time is this normal thing you have to do ? i have checked for chassis tweak by putting blocks under chassis they is no movement of chassis thanks for any replys |
Author: | Stanley Bąk [ Fri Jun 22, 2012 12:09:46 ] |
Post subject: | Re: xray t3 2012 set up |
unscrew the top deck and front bumper put the chassis on the glass(because glass is always flat) and check the chassis tweak |
Page 1 of 1 | All times are UTC + 2 hours |
Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |