| XRAY - Model racing cars https://setup.teamxray.com/xsetup/legacy/ |
|
| Orca 4.5T Motor temperature after 5 mins racing? https://setup.teamxray.com/xsetup/legacy/viewtopic.php?f=8&t=12628 |
Page 1 of 1 |
| Author: | scotty01 [ Sat Jun 02, 2012 14:32:24 ] |
| Post subject: | Orca 4.5T Motor temperature after 5 mins racing? |
Ok im running Orca 4.5T RX2 with Vrittra Pro Spec Mark 2 ESC and just purchased a temp gun, now just wondering what is a good temp to be at after 5 mins racing? and what is not a good temp to be at? and the cut off point as not to burn the motor or damage it. if anyone can advise me on this it would be great many thanks. Scott |
|
| Author: | Skiddins [ Sat Jun 02, 2012 18:59:34 ] |
| Post subject: | Re: Orca 4.5T Motor temperature after 5 mins racing? |
Is there not any data on the leaflet supplied with the motor? |
|
| Author: | scotty01 [ Sun Jun 03, 2012 11:17:46 ] |
| Post subject: | Re: Orca 4.5T Motor temperature after 5 mins racing? |
Its just arrived from Singapore the other motor i had never worked properly need to get that fixed and this one i have not seen the leaflet as i am away working Skiddins do you know about this motor? I will just check the leaflet if its in there... |
|
| Author: | Stusdal [ Mon Jun 04, 2012 12:09:07 ] |
| Post subject: | Re: Orca 4.5T Motor temperature after 5 mins racing? |
I have been told that Orca team racer, Adrian Berntsen runs it at approx 90 degree Celsius. |
|
| Author: | grauer_wolf [ Mon Jun 04, 2012 22:12:45 ] |
| Post subject: | Re: Orca 4.5T Motor temperature after 5 mins racing? |
My son Finn used the RX2 4.5 T with VRITRA VX last weekend at ETS in Apeldoorn NL. Temperature was 92 degree Celsius, speedo and motor worked absolutely fine. So, normally a modified motor had no problems with temperatures about 90-95 degree Celsius. greetings Wolf |
|
| Page 1 of 1 | All times are UTC + 2 hours |
| Powered by phpBB © 2000, 2002, 2005, 2007 phpBB Group http://www.phpbb.com/ |
|